COLLOIDAL SILVER generator 27V - USB powered with current limiting circuit
Silver-eMed C08 is complete end to end solution so you can make your own safe, micro-particle, therapeutic colloidal silver water.
Why you should consider our solution and use it with confidence?
Fit for purpose: Our product is designed to produce the smallest particles in size with range from 001 to .01 microns (10 to 100 angstroms) or (1 to 10 nano-meters). That is the size of silver particles that best absorb light in the indigo range, leaving only its inverse color, transparent to yellow, to be observed. It has a build-in step-up power module converting 5V to 27 volts and current output limiting circuit to 1mA.
Fit for use: Powered by micro USB cable and due to the device compact size you can always bring it anywhere with you and power it from any USB port (computer, phone charger etc.). Due to the current limiting circuit the silver electrodes lifespan is significantly increased as well as the device extended operation on external battery supply (over 24 hours with a single charge). Using the included digital TDS meter you are able to precisely measure and reach the concentrations you are targeting.
Why particle size matters? (Smaller is better)
An ion is much smaller particle compared to a colloid, and has different characteristics. You can put trillions of ions in a drop of water and it will remain perfectly clear.
Why we use LIMITED CURRENT and 27 VOLTS power output?
Any classical colloidal silver generator will produce ionic silver at the same time it is producing colloids but the key difference to produce smaller particles (ions) is limited output current to be applied. The emitted particle size depends on the intensity of the electrical current while the concentration (strength) depends on the time the current is flowing between the silver electrodes.
Higher currents tend to blast off larger particles from the silver. Low (limited) current tends to generate smaller particles, and therefore silver ions rich solutions. Following Dr. Bob Becker’s recommendations and our own extensive research in producing high quality colloidal silver water the optimal direct current output appears to be within the range of 25-30 volts.
Complete unit includes:
Note: Power Bank from the picture is no longer part of this kit due to quality issues.
- Silver e-Med c08 Colloidal Silver Generator
- 2x10cm Ultra Pure Silver Electrodes 9999 (99.99%) 1mm diameter
- High quality micro USB to USB cable (1m)
- Portable Digital TDS Meter 0-9990 PPM
- Electrodes scouring pad
- User Manual
Silver-eMed c08 Technical specifications
- Device dimensions: 81*41*20mm
- Powered via micro USB socket
- Step-up power module (5v to 27 volts)
- Limited current output to 1mA
- Power consumption <150mW
- Short circuit protection
- Removable/replaceable ultra-pure silver electrodes
- Blue LED operation indicator
- Silver-eMed Batch Table (included in the User Manual)
Download Silver Purity Certificate
When preparing your solution give it a time to reach the concentration you are targeting. The batch cycles depends on the colloidal silver strength (ppm) you desire to achieve. Electrodes will darken in color at the end of each cycle. In order to produce high quality and pure colloidal/ionic silver water we strongly recommend you carefully clean the electrodes before each cycle (in one hour intervals).
Please, refer to the user manual for detailed step by step process walk-trough.
Download User Manual
£ 69
In Stock.
Free Shipping within UK & Free Shipping to EU (all countries), US and Canada with Royal Mail International Tracked Shipping. Full refund if you don’t receive the item + 60 days Return Policy.